Competition Sled SQMIZE® ELITE CLUB CSL400
Competition Sled SQMIZE® ELITE CLUB CSL400
€339.95
% €389.95* (12.82% saved)
Available, delivery time: 2-5 Tage
Competition Sled SQMIZE® ELITE CLUB CSL400
The SQMIZE® ELITE CLUB CSL400 Competition Sled is built for one of the most demanding stations in competitive functional fitness: moving a loaded sled along the track, pushing forward, pulling backward, meter after meter. With a net weight of 30 kg, a load capacity of up to 300 kg, and 4 knurled handles with markings, this power sled is designed for competition-level sled training – from light-load technique drills to heavy pushes over the full distance.
Push and Pull in Both Directions
The frame is made of 70 x 50 mm steel tubing, and the runners are 100 cm long with angled ends on both sides. This allows the CSL400 to glide in both directions and follow you seamlessly from pushing to pulling. The crossbars support the central weight plate post, keeping the load centered between the runners and close to the ground.
The CSL400 is designed for sports flooring intended for sled training, such as turf or sled track surfaces. Both flooring options are available below.
Marked, Removable Plug-In Handles
The 4 handles are made of chrome-plated steel, measure 82 cm in length and 48 mm in diameter, and feature knurling. Circumferential markings provide fixed reference points for hand placement. You can grip the handles at the same position on every run and deliberately vary the grip height: high for upright sprints, low for powerful pushes with a more horizontal upper body.
A center-to-center spacing of 52 cm is approximately shoulder-width and transfers power from your legs and hips directly to the sled. The handles are inserted into their mounts and can be removed. This turns the CSL400 into a dedicated pull sled for rope and harness training and significantly reduces its height when stored.
Loading Capacity up to 300 kg and Tow Eyes at the Front and Rear
The central weight plate post accommodates weight plates with a 50 mm center hole and extends to a height of 80 cm. You can load up to 300 kg, and changing the load takes just seconds. With its own weight of 30 kg, the sled is already suitable for technique work and speed intervals even when unloaded.
Two tow eyes, centrally positioned at the front and rear, accommodate a pull rope or harness. This allows you to pull the sled toward you hand over hand, sprint forward using a hip belt, or walk backward while pulling the rope. The pull rope and harness are not included.
Training with the CSL400
Pushing the sled trains the entire posterior and anterior extensor chain: the quadriceps, glutes, and calves work against the load, while the core and shoulders transfer power to the handles. Pulling the sled backward places the emphasis on the quadriceps. The movement is almost entirely concentric and is therefore considered knee-friendly.
When pulling the rope hand over hand, the latissimus, biceps, and forearms are engaged, with grip strength becoming a decisive factor. Heavy pushes over short distances build acceleration power, while lighter runs over longer distances develop endurance under load. In a circuit, you can combine the CSL400 with a rowing machine, ski trainer, or wall balls to create stations commonly found in fitness competitions.
Technical Specifications
| Overall Dimensions and Frame | |
|---|---|
| Length | 100 cm |
| Width | 60 cm |
| Height with Handles | 100.5 cm |
| Frame Profile | 70 x 50 mm |
| Frame Material | Steel, powder-coated |
| Runners | Angled at both ends |
| Tow Eyes | 2, centrally positioned at the front and rear |
| Net Weight | 30 kg |
| Delivery Condition | Disassembled, with assembly instructions |
| Handles | |
|---|---|
| Quantity | 4, removable plug-in design |
| Handle Length | 82 cm |
| Handle Diameter | 48 mm |
| Handle Spacing (Center to Center) | 52 cm |
| Surface | Knurled, with hand-position markings |
| Material | Chrome-plated steel |
| Weight Plate Loading | |
|---|---|
| Weight Plate Post | 1, centrally positioned, for weight plates with a 50 mm center hole |
| Weight Plate Post Height | 80 cm |
| Material | Chrome-plated steel |
| Max. Loading Capacity | 300 kg |
Optional Accessories
Suitable flooring for your sled track is available separately and is not included in the scope of delivery.
| Item Number | Function |
|---|---|
| GRM10.4-15 | High Density Turf Flooring SQMIZE® Premium Bison, turf surface for sled tracks |
| GRM16-16 | Sled Track Flooring SQMIZE®, flooring for sled tracks |
At a Glance
- Angled runners for pushing and pulling in both directions
- 4 knurled handles with markings, 48 mm diameter, removable plug-in design
- Central weight plate post for 50 mm plates, with a loading capacity of up to 300 kg
- Tow eyes at the front and rear for rope and harness training
- 30 kg net weight and a footprint of 100 x 60 cm
Login