Wall-Mounted Cable Pulley SQMIZE® Premium Bison FPT600SH with 90 kg Weight Block
Wall-Mounted Cable Pulley SQMIZE® Premium Bison FPT600SH with 90 kg Weight Block
€999.95
% €1,399.95* (28.57% saved)
Available, delivery time: 2-5 Tage
Wall-Mounted Cable Pulley SQMIZE® Premium Bison FPT600SH with 90 kg Weight Stack – Linear Bearings, Aluminum Pulleys and Stainless Steel Guide Rail
The SQMIZE® Premium Bison FPT600SH brings a cable pulley system with a weight stack to your wall. A 90 kg weight stack with Magnetic Pin, a linearly guided height-adjustable carriage with 13 positions from 53 to 173 cm, and a cover featuring an attractive laser-cut logo design make it a complete training station for lat pulldowns, rows, face pulls and triceps pushdowns. With a width of just 78 cm, it requires very little floor space. Manufactured to Premium Bison quality standards, it features a frame made of 75 × 75 × 3 mm steel tubing and a guide rail made of brushed stainless steel.
90 kg Weight Stack with Magnetic Pin
The weight stack consists of 18 steel plates weighing 5 kg each. Plastic bushings in each plate ensure smooth movement along the 2 guide rods with a diameter of 20 mm. You select the weight using the Magnetic Pin: insert, pull and you're ready to go. This allows you to change the load in seconds, making it ideal for supersets, drop sets and partner training. With the FPT600SH-WS30 weight stack upgrade, you can add another 30 kg, increasing the total weight to 120 kg.
Cover with Laser-Cut Logo Design
The front of the weight stack tower is fitted with a cover featuring a laser-cut SQMIZE® logo. It gives the station a clean, premium appearance while shielding the moving weight stack from the training area.
1:2 or 1:1 Resistance Ratio – Depending on the Exercise
The cable runs over 2 pulleys on the height-adjustable carriage and ends in 2 carabiners. When using one handle, the resistance ratio is 1:2: you move half the selected weight over a cable travel of approximately 220 cm – ideal for long, single-arm movements. With both handles, you train at a 1:1 ratio, using the full selected weight over a cable travel of approximately 110 cm, for example during lat pulldowns with a bar or two-arm rows.
13 Positions on Stainless Steel
The height-adjustable carriage glides along the guide rail made of brushed stainless steel and locks into 13 numbered positions between 53 and 173 cm. The engraved numbers let you immediately identify your preferred setting. Set it low for rows and curls or high for lat pulldowns and triceps pushdowns – simply choose the cable angle to suit your exercise.
Footplate for Seated Rows
The included footplate is made of 4 mm steel and measures 40 × 25 cm. It features an anti-slip textured surface and a cut-out SQMIZE® logo. It can be adjusted to 6 different length positions to suit your height. With your feet firmly positioned, you can pull the weight towards your abdomen in a controlled manner during seated rows, training your latissimus, mid-back and rear shoulders.
Versatile Cable Pulley Exercises
With a cable pulley system, resistance is always applied in the direction of the cable. This allows you to freely choose your training angles and movement paths. From a high position, you can perform kneeling lat pulldowns, triceps pushdowns and face pulls. At mid-height, you can perform chest presses, Pallof presses and woodchopper movements for your core. From a low position, you can perform seated rows, biceps curls, lateral raises and glute kickbacks. Suitable handles, lat pulldown bars and triceps ropes can be found in our SQMIZE® Cable Pulley Accessories.
Premium Bison: Frame and Load Capacity
The FPT600SH belongs to the Premium Bison quality class. Its frame, made of 75 × 75 × 3 mm steel tubing, has a load capacity of up to 500 kg. The cable is rated for a static load of 1,000 kg and a dynamic load of 750 kg. The height-adjustable carriage runs along a 60 × 60 mm guide rail made of brushed stainless steel, while the cable runs over aluminum pulleys – ensuring smooth operation and precise adjustment.
Space-Saving Wall-Mounted Design
With a height of 213.5 cm, a width of 78 cm and a depth of 90 to 95 cm, depending on the footplate position, the FPT600SH keeps the training area in front of it clear. It is secured to the wall using 2 mounting brackets: the lower bracket has 2 mounting holes, with the lowest hole positioned 10 cm above the floor. On the upper bracket, the lowest mounting hole is located at approximately 195 cm. The center-to-center distance between the mounting holes is 15 cm in each case. Installation requires a load-bearing solid wall and fixing materials approved for the specific wall construction and load. We recommend having the unit installed by a qualified professional. Mounting hardware is not included, as the appropriate fixings depend on the wall and installation location.
Technical Specifications
| Overall Dimensions and Frame | |
|---|---|
| Height | 213.5 cm |
| Width | 78 cm |
| Depth | 90 to 95 cm, depending on the footplate position |
| Net Weight | 165 kg |
| Frame Profile | 75 × 75 × 3 mm steel |
| Guide Rail | 60 × 60 mm, brushed stainless steel |
| Frame Load Capacity | 500 kg |
| Installation | Wall-mounted on a load-bearing solid wall; mounting hardware not included |
| Lower Bracket Mounting | 2 mounting holes, lowest hole 10 cm above the floor, 15 cm center-to-center distance |
| Upper Bracket Mounting | Lowest mounting hole at approx. 195 cm, 15 cm center-to-center distance |
| Movement and Adjustment | |
|---|---|
| Cable System | Single cable, linearly guided |
| Height Adjustment | 13 positions, 53 to 173 cm |
| Resistance Ratio | 1:2 with one handle, 1:1 with both handles |
| Cable Travel | Approx. 220 cm with one handle, approx. 110 cm with both handles |
| Weight Stack Guide Rods | 2 × Ø 20 mm |
| Pulleys | Aluminum |
| Cable Load Rating | 1,000 kg static, 750 kg dynamic |
| Weight Stack | |
|---|---|
| Weight | 90 kg |
| Weight Plates | 18 × 5 kg, steel with plastic bushings |
| Weight Selection | Magnetic Pin |
| Cover | Laser-cut logo design with SQMIZE® lettering |
| Upgrade | Optional upgrade to 120 kg with weight stack upgrade FPT600SH-WS30 |
| Footplate | |
|---|---|
| Dimensions | 40 × 25 cm |
| Material Thickness | 4 mm steel |
| Adjustment | 6 length positions |
| Surface | Textured anti-slip surface with cut-out SQMIZE® logo |
Scope of delivery: Wall-mounted cable pulley SQMIZE® Premium Bison FPT600SH with 90 kg weight stack, Magnetic Pin, cover, footplate and 2 handles with carabiners. Mounting hardware is not included.
At a Glance
- Wall-mounted cable pulley system with 90 kg weight stack and Magnetic Pin, upgradeable to 120 kg
- 18 steel plates weighing 5 kg each, with plastic bushings for smooth operation
- 1:2 resistance ratio with one handle, 1:1 with both handles
- 13 height positions from 53 to 173 cm on a stainless steel guide rail
- Premium Bison: 75 × 75 × 3 mm frame, cover with laser-cut logo design
Login