Freestanding Cable Machine SQMIZE® Premium Bison SQ-S655 with 90 kg Weight Stack
Freestanding Cable Machine SQMIZE® Premium Bison SQ-S655 with 90 kg Weight Stack
€1,199.95
% €1,499.95* (20% saved)
Available, delivery time: 2-5 Tage
Freestanding Cable Machine SQMIZE® Premium Bison SQ-S655 with 90 kg Weight Stack
Solid steel, smooth operation, clean lines: The SQMIZE® Premium Bison SQ-S655 is a cable machine you can feel from the very first pull. With a total weight of 192 kg, a frame made of 75 × 75 × 3 mm steel tubing and a 90 kg weight stack with Magnetic Pin, it becomes a permanent fixture in your gym. The height-adjustable carriage glides along brushed stainless steel, while the cable runs smoothly over aluminium pulleys – Premium Bison quality you will notice with every repetition.
Rock-solid stability – even without anchoring
The SQ-S655 does not require a wall. Its widely splayed feet and 192 kg net weight ensure that it stands freely in the room, stable and secure, even when pulling heavy loads. For studios that prefer to anchor their equipment permanently, the floor plates on the feet are pre-drilled. This allows you to position the machine wherever it best complements your training setup.
90 kg weight stack with Magnetic Pin
The weight stack consists of 18 steel plates weighing 5 kg each, fitted with plastic sleeves for smooth movement along the 20 mm guide rods. The plates are marked in kg and lb. The Magnetic Pin lets you select your desired weight in seconds – ideal for supersets, drop sets and partner workouts. With the FPT600SH-WS30 weight stack upgrade, you can expand the stack to 120 kg at any time.
Smooth operation down to the last detail
You will notice what sets the SQ-S655 apart as soon as you start moving: The cable runs over aluminium pulleys, the weight stack moves along linear guides, and the height-adjustable carriage glides precisely along a 60 × 60 mm brushed stainless steel guide column. The result is a smooth, consistent and solid pulling motion from the first repetition to the last.
1:2 or 1:1 pulley ratio
The cable runs over 2 pulleys on the height-adjustable carriage and terminates in 2 carabiners. When training with one handle, you use a 1:2 pulley ratio and move half the selected weight over a cable travel distance of approximately 220 cm – ideal for long, single-arm movements. Using both handles gives you a 1:1 ratio with the full selected weight over approximately 110 cm of cable travel, for example when performing lat pulldowns with a bar or two-arm rows.
13 height positions from 53 to 173 cm
The height-adjustable carriage locks into 13 numbered positions. The engraved numbers on the stainless steel make it easy to identify your preferred setting at a glance. Set it low for rows and curls or high for lat pulldowns and triceps pushdowns: You can adjust the pulling angle to suit each exercise.
Footplate for seated rowing
The 4 mm steel footplate measures 40 × 25 cm and features an anti-slip textured surface with a cut-out SQMIZE® logo. It is mounted on a 50 × 50 mm square tube and offers 6 lengthwise adjustment positions. With a firm foothold, you can pull the weight towards your abdomen in a controlled manner during seated rows, targeting the latissimus, middle back and rear shoulders.
Versatile cable exercises
With a cable machine, resistance always acts in the direction of the cable pull. This allows you to freely choose the angle and range of motion. From a high position, you can perform kneeling lat pulldowns, triceps pushdowns and face pulls; at mid-height, chest presses, Pallof presses and woodchoppers for your core; and from a low position, seated rows, biceps curls, lateral raises and glute kickbacks. Suitable handles, lat pulldown bars and triceps ropes are available in the SQMIZE® cable machine accessories range.
Premium Bison design
The weight stack cover features the SQMIZE® logo in an attractive laser-cut design, while the distinctive perforated pattern of the design panel adds a bold visual accent. The frame, made of 75 × 75 × 3 mm steel tubing, has a load capacity of up to 500 kg. The cable is designed for a static load of 1,000 kg and a dynamic load of 750 kg. A machine that makes a strong impression in both commercial gyms and home gyms.
Technical Specifications
| Overall Dimensions and Frame | |
|---|---|
| Height | 213.5 cm |
| Width | 122.5 cm |
| Depth | 89.5 to 114 cm, depending on the footplate position |
| Net Weight | 192 kg |
| Frame Tubing | 75 × 75 × 3 mm steel |
| Guide Column | 60 × 60 mm, brushed stainless steel |
| Frame Load Capacity | 500 kg |
| Installation | Freestanding, floor plates pre-drilled for optional anchoring |
| Movement and Adjustments | |
|---|---|
| Cable System | Single cable, linearly guided |
| Height Adjustment | 13 positions, 53 to 173 cm |
| Pulley Ratio | 1:2 with one handle, 1:1 with both handles |
| Cable Travel | Approx. 220 cm with one handle, approx. 110 cm with both handles |
| Weight Stack Guide Rods | 2 × Ø 20 mm |
| Pulleys | Aluminium |
| Cable Load Capacity | 1,000 kg static, 750 kg dynamic |
| Weight Stack | |
|---|---|
| Weight | 90 kg |
| Weight Plates | 18 × 5 kg, steel with plastic sleeves |
| Markings | kg and lb |
| Weight Selection | Magnetic Pin |
| Cover | Laser logo design with SQMIZE® lettering |
| Upgrade | Optional upgrade to 120 kg with weight stack upgrade FPT600SH-WS30 |
| Footplate | |
|---|---|
| Dimensions | 40 × 25 cm |
| Material Thickness | 4 mm steel |
| Mounting | 50 × 50 mm square tube |
| Adjustment | 6 lengthwise positions |
| Surface | Textured surface with cut-out SQMIZE® logo |
Included in delivery: SQMIZE® Premium Bison SQ-S655 cable machine with 90 kg weight stack, Magnetic Pin, cover, footplate and 2 hand straps with carabiners. Fixing hardware for optional floor anchoring is not included.
At a Glance
- Freestanding cable machine with a net weight of 192 kg – stable even without anchoring
- 90 kg weight stack with Magnetic Pin, expandable to 120 kg
- Smooth operation thanks to aluminium pulleys and stainless steel guide column
- 1:2 pulley ratio with one handle, 1:1 with both handles, 13 height positions
- Premium Bison: 75 × 75 × 3 mm frame, laser logo design, frame load capacity up to 500 kg
0 of 0 reviews
Average rating of 0 out of 5 stars
Login
Accessory Items