Super Curl Bar SQMIZE® OB47SC, 25 mm
Super Curl Bar SQMIZE® OB47SC, 25 mm
€68.95
% €106.95* (35.53% saved)
Available, delivery time: 2-5 Tage
50 mm Super Curl Bar SQMIZE® OB47SC, 25 mm
The 50 mm Super Curl Bar SQMIZE® OB47SC features a pronounced U-shaped design in the center of the bar. This unique shape provides additional grip positions, including a neutral grip with the palms facing each other. With an overall length of 120 cm, an inside length of 81 cm, a weight of 8.5 kg and a load capacity of 230 kg, it is built for heavy arm and forearm training.
The U-Shape and Its Grip Positions
A conventional EZ curl bar offers two angled grip positions. The Super Curl Bar goes significantly further: its deep bends extend into vertical sections, providing a complete range of grip positions from supinated and angled grips to a true neutral grip. With a neutral grip, the wrists, forearms and elbows remain aligned, allowing you to maintain proper positioning even as repetitions become challenging. The grip areas are knurled to ensure a secure hold at every angle.
Biceps, Brachialis and Forearms
The grip angle plays an important role in determining which muscles perform the work. With a supinated grip, the biceps brachii takes center stage. Switching to a neutral grip increases the involvement of the brachialis and brachioradialis. The brachialis lies underneath the biceps and, as it develops, helps create the appearance of greater upper arm size. With a single bar, you can perform barbell curls, hammer curls, preacher curls, concentration exercises and forearm curls using a full range of grip positions.
Triceps Training with the Same Bar
Rotate the grip forward and the OB47SC becomes a versatile tool for triceps training: lying triceps extensions (skull crushers) on a flat bench, overhead French presses, close-grip bench presses and cable triceps extensions. The U-shaped design provides a defined movement path for the elbows, while offering sufficient clearance from the bench when lowering the bar behind the head. Upright rows and front raises can also be performed using the inner grip positions.
Solid Steel, Chrome and Bronze Bushings
The bar is manufactured from solid steel with a chrome finish. Its 230 kg load capacity far exceeds the weights typically used in arm training, providing plenty of reserve capacity for heavy close-grip bench press sets. The sleeves rotate on bronze bushings, allowing them to turn with the weight plates and preventing rotational forces from being transferred to the grip. The 50 mm diameter sleeves offer a loadable length of 18 cm and accommodate Olympic bumper plates and cast iron weight plates. Integrated dual snap ring end caps securely enclose the sleeves.
Technical Specifications
| Feature | Specification |
|---|---|
| Weight | 8.5 kg |
| Overall Length | 120 cm |
| Design | Super Curl Bar with pronounced U-shape |
| Load Capacity (Static) | 230 kg (500 lb.) |
| Shaft Diameter | 25 mm |
| Grip Area (Inside Length Between Sleeves) | 81 cm |
| Knurling | Comfortable knurling on the grip areas |
| Sleeve Diameter | 50 mm |
| Loadable Sleeve Length | 18 cm |
| Bearing System | Bronze bushings |
| Closure System | Integrated dual snap ring end caps |
| Shaft Material | Solid steel |
| Coating | Chrome |
| Recommended Use | Arm and forearm training, home gyms and commercial gyms |
| Dropping | Not designed for dropping |
| Warranty | 24 months |
Scope of Delivery
1 Super Curl Bar SQMIZE® OB47SC, 50 mm. Barbell collars are not included.
Care Instructions
Our barbells are supplied from the factory with a protective layer of oil and protective film. Before first use, remove the oil with a dry, soft cloth. For further care instructions, please refer to the enclosed information leaflet or our 5-Step Guide to Proper 50 mm Olympic Barbell Care.
- Pronounced U-shaped design with neutral grip positions extending into vertical sections
- 120 cm overall length, 81 cm inside length, 8.5 kg weight
- Solid steel, chrome-plated, static load capacity up to 230 kg
- Bronze bushings allow the sleeves to rotate smoothly with the weight plates
- 25 mm shaft diameter with knurling on all grip areas
Login
1 - 10 of 20 reviews
Von: Norman M. · October 6, 2026 12:41 PM
Gutes Material in einwandfreier Verarbeitung
Top Ergänzung für mein Homegym
Von: Konstantin H. · March 19, 2026 5:24 PM
Würde ich jederzeit wiederkaufen
Top Stange, sehr massiv & hochwertig
Von: Sebastian R. · May 22, 2025 6:32 PM
Gute Sz Stange mit vielen Anwendungsmöglichkeiten!
Sehr vielseitig einsetzbar. Leider ist der Versand mangelhaft - der Artikel war 2x beschädigt davon einmal nicht nutzbar.
Von: Niklas B. · March 25, 2025 12:06 PM
Top Qualität und super Preis Leistung
Ein noch besseres Trainingsgefühl als mit einer normal SZ-Stange
Von: Daniel E. · November 27, 2024 2:18 PM
Top Produkt
Sehr gute scharfe Rändelung. Perfekter Ausschnitt für Skull Crusher! Top Preis Leistung!
Von: Fabian O. · September 17, 2024 8:06 AM
Sehr gutes Preis / Leistungs-Verhältnis mit sehr gutem Versand
Sehr gutes Produkt zu einem wirklich fairen Preis. Versandt durch UPS war top! Gerne wieder.
Von: Johannes · June 14, 2024 11:05 AM
Zufrieden
Qualität und Verarbeitung ist für den Preis mehr als gut. Rändelung ist griffig aber nicht zu rau.
Von: Peter · April 11, 2024 11:12 AM
Sensationell
Top-Qualität! Da macht das curlen noch mehr Spaß.
Von: Andre · February 27, 2024 9:41 PM
Perfekt für das Home-Gym
Die Hantelstange ist solide verarbeitet und bietet eine angenehme Griffposition für Bizeps- und Trizepsübungen. Die verchromte Oberfläche macht sie robust und langlebig. Insgesamt eine sehr empfehlenswerte Wahl für das Home-Gym.
Von: Simon · December 5, 2023 9:39 PM
Komplett zufrieden
Habe die Stange im Angebot gekauft! Sie liegt top in der Hand und ist die perfekte Ergänzung zur Langhantel! Ist jetzt seit ein paar Wochen in Betrieb. Geht flüssig ohne Quietschen etc. Würde ich wieder nehmen!