Short Camber Bar SQMIZE® OB68CB-S, 50 mm
Short Camber Bar SQMIZE® OB68CB-S, 50 mm
€133.95
% €181.95* (26.38% saved)
Available, delivery time: 2-5 Tage
Short Camber Bar SQMIZE® OB68CB-S, 50 mm
The Short Camber Bar SQMIZE® OB68CB-S positions the grip area 5.5 cm below the level of the sleeves. The cambered section extends over 67 cm, measured from the beginning of the bend, increasing the range of motion during exercises on a bench or in a rack. With an overall length of 173 cm, a grip area of 120 cm, a weight of 13.3 kg and a load capacity of 300 kg, this bar offers outstanding versatility for strength training.
5.5 cm Lower Than a Conventional Barbell
The cambered design delivers two effects simultaneously. The grip sits lower, allowing the bar to travel further at the bottom of the movement than a straight barbell. At the same time, the load is positioned above the grip level, creating an additional balancing challenge. The stabilizing muscles in your shoulders and core remain actively engaged throughout every repetition, increasing the training stimulus of each set. With an overall length of 173 cm and 120 cm between the sleeves, the bar maintains dimensions suitable for use with racks and weight benches.
Bench Presses with an Extended Range of Motion
During bench presses, the bar can be lowered below chest level. This allows the pectoralis major to work through a longer range of motion and experience a significantly deeper stretch at the bottom of the movement before pressing the weight back up. The effect becomes even more pronounced during incline bench presses. The lowered grip position also offers interesting possibilities for floor presses and board presses, as the stopping point can be adjusted differently compared to a straight barbell.
Rows, Squats and Six Grip Areas
During bent-over rows, the additional range of motion allows the bar to travel closer to the torso, enabling greater shoulder blade retraction and allowing the latissimus dorsi to work through a full range of motion. During squats, the cambered design creates a different training stimulus as the weight shifts below the support position, requiring greater stabilization from the core and spinal erectors. Six knurled grip areas are distributed along the bar, allowing you to switch between narrow, medium and wide grips without setting the bar down.
Solid Steel, Chrome and Bronze Bushings
The bar is manufactured from solid steel with a chrome finish. Its 300 kg load capacity provides ample reserve for heavy rowing and pressing exercises. The sleeves rotate on bronze bushings, have a diameter of 50 mm and offer a loadable length of 24.5 cm. This provides sufficient space for Olympic bumper plates and multiple weight plates on each side.
Technical Specifications
| Feature | Specification |
|---|---|
| Weight | 13.3 kg |
| Overall Length | 173 cm |
| Design | Short Cambered Bar |
| Camber Depth | 5.5 cm |
| Camber Length | 67 cm (measured from the beginning of the bend) |
| Load Capacity (Static) | 300 kg |
| Shaft Diameter | 28.5 mm |
| Grip Area (Inside Length Between Sleeves) | 120 cm |
| Knurling | Six knurled grip areas |
| Sleeve Diameter | 50 mm |
| Loadable Sleeve Length | 24.5 cm |
| Bearing System | Bronze bushings |
| Shaft Material | Solid steel |
| Coating | Chrome |
| Recommended Use | Bench presses, rows and squats using a rack and weight bench |
| Dropping | Not designed for dropping |
| Warranty | 24 months |
Scope of Delivery
1 Short Camber Bar SQMIZE® OB68CB-S, 50 mm. Barbell collars are not included.
Care Instructions
Before first use, remove the protective film with an absorbent cloth. For further care instructions, please refer to the enclosed information leaflet or our 5-Step Guide to Proper 50 mm Olympic Barbell Care.
- 5.5 cm camber depth over a 67 cm curved section for an extended range of motion
- Six knurled grip areas for narrow, medium and wide grip positions
- 173 cm overall length, 120 cm grip area, 13.3 kg weight
- Solid steel, chrome-plated, static load capacity up to 300 kg
- Bronze bushings, 50 mm sleeves with a loadable length of 24.5 cm
Login
3 reviews
Von: Fabian N. · January 28, 2026 9:41 AM
Nichts zu meckern!
Arbeite ohne Rack und benutze die Hantel für Curls und Ruderübungen.
Sehr zu empfehlen.
Von: Margherita N. · November 20, 2024 9:36 PM
Top quality
Ottima barra che si aggiunge alla mia collezione di cambered bar .. la meno invasiva a livello di rom
Von: Moses · June 5, 2024 3:22 PM
Sehr schön, keine Beanstandungen
Die Lieferung kam pünktlich, Verpackung und Stange waren in tadellosem Zustand und die Verarbeitungsqualität kann sich wirklich sehen lassen. Die Rändelungen machen die Stange griffig ohne störend scharf oder kantig zu sein und die Kugellager laufen rund und quietschen nicht.
Eine größere Bestellung steht noch aus, auch dazu werd´ ich berichten.
Bis hierhin besten Dank simpleproducts