Skip to main content Skip to search Skip to main navigation

Wall-Mounted Cable Pulley SQMIZE® Premium Bison FPT600 Plate Loaded

Wall-Mounted Cable Pulley SQMIZE® Premium Bison FPT600 Plate Loaded 50 mm – with Linear Bearings, Aluminum Pulleys and Stainless Steel Guide Rail

The SQMIZE® Premium Bison FPT600 brings a fully-fledged cable pulley system to your wall. It is loaded with your 50 mm weight plates, the carriage moves linearly along 2 guide rods, and the pulley assembly can be adjusted to 13 positions from 53 to 173 cm. With a width of just 78 cm, this cable machine requires little floor space while still covering a wide range of exercises: lat pulldowns, rows, face pulls, triceps pushdowns and much more. Manufactured to Premium Bison quality standards, it features a frame made of 75 × 75 × 3 mm steel tubing and a guide rail made of brushed stainless steel.

Plate Loaded – Train with Your Own Weight Plates

The FPT600 operates without a weight stack. Resistance is provided by your own weight plates, which are loaded onto the 2 sleeves on the weight carriage – each with a diameter of 50 mm and a loading length of 27.5 cm. The carriage itself weighs approximately 8 kg and runs linearly on 2 guide rods with a diameter of 30 mm. This allows you to use the plates you already own for your barbell and rack, increasing the load in precisely the increments your plates allow.

2 Resistance Ratios: 1:2 with One Handle, 1:1 with Both

The cable runs over 2 pulleys on the height-adjustable carriage and ends in 2 carabiners. When training with one handle, the resistance ratio is 1:2: you move half the selected weight over a cable travel of approximately 270 cm. This is ideal for long movements and single-arm exercises. When both handles are attached, the ratio is 1:1, meaning you work with the full weight over a cable travel of approximately 135 cm, for example during lat pulldowns with a bar or two-arm rows.

13 Height Positions from 53 to 173 cm

The height-adjustable carriage glides along the brushed stainless steel guide rail and locks into 13 numbered positions. The engraved numbers allow you to see at a glance which position you last used for training. From the lowest position for rows and curls to the highest for lat pulldowns and triceps pushdowns, you can adjust the cable angle to suit your exercise.

Footplate for Seated Rows

A 4 mm steel footplate is included for seated rows. Measuring 40 × 25 cm, it features an anti-slip textured surface and a cut-out SQMIZE® logo. It can be adjusted to 6 different length positions, allowing you to customize the distance from the cable machine to your body height. With your feet firmly positioned, you can pull the weight towards your abdomen in a controlled manner, training your latissimus, mid-back and rear shoulders.

Cable Pulley Exercises

With a cable pulley system, resistance is always applied in the direction of the cable. This allows you to freely choose angles and movement paths, targeting muscles from positions that are difficult to achieve with free weights. From above, you can perform kneeling lat pulldowns, triceps pushdowns and face pulls. At mid-height, you can perform chest presses, Pallof presses and woodchopper movements for your core. From below, you can perform seated rows, biceps curls, lateral raises and glute kickbacks. Suitable handles, lat pulldown bars and triceps ropes can be found in our SQMIZE® Cable Pulley Accessories.

Premium Bison: Frame, Guide System and Load Capacity

The FPT600 belongs to the Premium Bison quality class. The frame is made of 75 × 75 × 3 mm steel tubing, and the entire structure has a load capacity of up to 500 kg. Each cable can handle up to 120 kg, or 240 kg in total. The cable itself is rated for a static load of 1,000 kg and a dynamic load of 750 kg. The height-adjustable carriage runs along a 60 × 60 mm guide rail made of brushed stainless steel, while the cable runs over aluminum pulleys. The result is a training station that combines smooth operation and precise adjustment, making it a perfect addition to any gym.

Space-Saving Wall-Mounted Design

With a height of 213.5 cm, a width of 78 cm and a depth of 90 to 95 cm, depending on the footplate position, the FPT600 requires very little floor space while keeping the training area in front of it clear. It is secured to the wall using 2 mounting brackets: the lower bracket has 2 mounting holes, with the lowest hole positioned 10 cm above the floor. On the upper bracket, the lowest mounting hole is located at approximately 195 cm. The center-to-center distance between the mounting holes is 15 cm in each case. Installation requires a load-bearing solid wall and fixing materials approved for the specific wall construction and load. We recommend having the unit installed by a qualified professional. Mounting hardware is not included, as the appropriate fixings depend on the wall and installation location.

Technical Specifications

Overall Dimensions and Frame
Height 213.5 cm
Width 78 cm
Depth 90 to 95 cm, depending on the footplate position
Net Weight 60 kg
Frame Profile 75 × 75 × 3 mm steel
Guide Rail 60 × 60 mm, brushed stainless steel
Frame Load Capacity 500 kg
Installation Wall-mounted on a load-bearing solid wall; mounting hardware not included
Lower Bracket Mounting 2 mounting holes, lowest hole 10 cm above the floor, 15 cm center-to-center distance
Upper Bracket Mounting Lowest mounting hole at approx. 195 cm, 15 cm center-to-center distance
Movement and Adjustment
Cable System Single cable, linearly guided
Height Adjustment 13 positions, 53 to 173 cm
Resistance Ratio 1:2 with one handle, 1:1 with both handles
Cable Travel Approx. 270 cm with one handle, approx. 135 cm with both handles
Guide Rods 2 × Ø 30 mm
Pulleys Aluminum
Load Capacity per Cable Max. 120 kg, 240 kg total
Cable Load Rating 1,000 kg static, 750 kg dynamic
Weight Plate Loading
Weight Plate Sleeves 2 × Ø 50 mm
Loading Length 27.5 cm each
Carriage Weight Approx. 8 kg
Footplate
Dimensions 40 × 25 cm
Material Thickness 4 mm steel
Adjustment 6 length positions
Surface Textured anti-slip surface with cut-out SQMIZE® logo

Scope of delivery: Wall-mounted cable pulley SQMIZE® Premium Bison FPT600 with weight carriage, footplate and 2 handles with carabiners. Weight plates and mounting hardware are not included.

At a Glance

  • Plate-loaded wall-mounted cable pulley system with 2 sleeves for 50 mm weight plates
  • 1:2 resistance ratio with one handle, 1:1 with both handles
  • 13 height positions from 53 to 173 cm on a stainless steel guide rail
  • Footplate for seated rows, adjustable to 6 different length positions
  • Premium Bison: 75 × 75 × 3 mm frame, frame load capacity up to 500 kg, each cable up to 120 kg

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Skip product gallery

Accessory Items

Row Handle SQMIZE® POWER PACK MB502RG with Ergonomic Rubber Grips
Row Handle SQMIZE® POWER PACK MB502RG with Ergonomic Rubber Grips

€9.95
SALE
Parallel Handle SQMIZE® POWER PACK MB502RGX with Swivel
Parallel Handle SQMIZE® POWER PACK MB502RGX with Swivel

€18.95 Regular price: €24.95 (24.05% saved)
SALE
BLACK MONTH
Tricep Rope SQMIZE® POWER PACK TR20 with Swivel Joint
Tricep Rope SQMIZE® POWER PACK TR20 with Swivel Joint

€13.95 Regular price: €19.95 (30.08% saved)
SALE
Triceps Rope One-Hand SQMIZE® POWER PACK TR10
Triceps Rope One-Hand SQMIZE® POWER PACK TR10

€6.95 Regular price: €10.95 (36.53% saved)
Triceps Belt SQMIZE® POWER PACK TB30
Triceps Belt SQMIZE® POWER PACK TB30

€14.95
SALE
Monster Tricep Handle SQMIZE® MB500R
Monster Tricep Handle SQMIZE® MB500R

€81.95 Regular price: €106.95 (23.38% saved)
SALE
Tricep V-Handle SQMIZE® POWER PACK MB504RG with Ergonomic Rubber Grips
Tricep V-Handle SQMIZE® POWER PACK MB504RG with Ergonomic Rubber Grips

€20.95 Regular price: €28.95 (27.63% saved)
Single Handle SQMIZE® POWER PACK MB501RG with Swivel
Single Handle SQMIZE® POWER PACK MB501RG with Swivel

€12.95
SALE
Single Handle Body-Track® MB501RG With Swivel
Single Handle Body-Track® MB501RG With Swivel

€26.95 Regular price: €35.95 (25.03% saved)
SALE
Monster Multi Lat Bar SQMIZE® MB600R, Length 113 CM
Monster Multi Lat Bar SQMIZE® MB600R, Length 113 CM

€143.95 Regular price: €170.95 (15.79% saved)

Servus nach Österreich! 🇦🇹 Entdecke unser Sortiment direkt in unserem AT-Shop. Nutze Beratung und Kundendienst direkt vor Ort!