SQMIZE® PREMIUM BISON PSP50i Pendulum Squat Station
SQMIZE® PREMIUM BISON PSP50i Pendulum Squat Station
SQMIZE® PREMIUM BISON PSP50i Pendulum Squat Station
€2,499.95
% €3,530.95* (29.2% saved)
Average rating of 5 out of 5 stars
No longer available
SQMIZE® PREMIUM BISON PSP50i Pendulum Squat Station
SQMIZE® PREMIUM BISON PSP50i Pendulum Squat Station, Plate Loaded
The Pendulum Squat guides the squat movement along a fixed path. The movement arm swings around a pivot axis, the body follows this curved path, and the resistance is transferred to the legs. The SQMIZE® PREMIUM BISON PSP50i brings this design to your gym with a freely adjustable counterweight, an angle-adjustable footplate and a substantial net weight of 165 kg.
The Adjustable Counterweight
The counterweight is the feature that sets the PSP50i apart from simpler pendulum squat designs. It counterbalances the weight of the backrest and shoulder pads, much like a balancing scale. This provides a more consistent resistance profile throughout the movement, while the counterweight offsets part of the load at the lowest point of the squat. Precisely where the squat becomes most demanding, this creates a smooth transition into the concentric phase. Adjustment is made using a dedicated 50 mm weight plate holder with a length of 19 cm, allowing you to regulate the assistance by adding or removing weight plates.
Footplate Adjustable from 30 to 45 Degrees
The footplate angle can be adjusted from 30 to 45 degrees in 5-degree increments. Each position changes the emphasis between the quadriceps, glutes and adductors while also affecting tension on the Achilles tendon. A flatter angle places greater emphasis on the glutes, while a steeper angle shifts more of the work towards the quadriceps and allows a deeper squat when ankle mobility is limited. The footplate is made from 5.5 mm thick steel, features a coarse non-slip surface and is equipped with a raised safety edge to prevent slipping. Its generous dimensions also provide sufficient space for a wide sumo stance.
Five Adjustable Range-of-Motion Stops
The lower range-of-motion stop offers five adjustment positions. This allows you to determine how far the movement arm travels and adapt the station to your height and training goals. Whether you're performing partial repetitions in the upper range, full-depth squats or exercises with a restricted range of motion during rehabilitation, the same machine accommodates all three.
Guided Movement Path and Range of Motion
The guided movement path has a direct effect on the achievable range of motion. While free-weight squats require you to manage balance, core stability and barbell positioning simultaneously, this machine allows you to focus on overcoming the resistance. This makes it easier to achieve a full range of motion down into a deep squat, while largely eliminating direct axial loading of the spine. For athletes with a history of back problems, high-volume training or sets performed close to muscular failure, this is the practical advantage of the Pendulum Squat design.
Bearings, Weight Plate Holders and Operation
The pivot axes are equipped with ball bearings. The movement arm starts smoothly without jerking and travels evenly throughout the entire range of motion, even under heavy loads. Two hard-chrome-plated 50 mm weight plate holders, each measuring 48 cm in length, accommodate the training load and provide enough space for a full bumper plate setup. The release lever features a handle with a diameter of 38 mm and a length of 27.5 cm, allowing safe operation from the starting position.
Getting started takes just seconds: load the weight plates, adjust the footplate angle and lower stop, position yourself beneath the shoulder pads and release the starting lever. After completing your set, the same lever allows you to secure the movement arm in its resting position without having to unload the weight plates.
Frame and Padding
The frame is constructed from 80 x 50 mm steel profiles with a wall thickness of 3 mm. Combined with the machine's 165 kg net weight, this ensures stability even during dynamic repetitions. The maximum load capacity is 360 kg. Backrest, headrest and shoulder pads support the upper body at three points, with the tapered shoulder pads measuring between 7 and 10 cm in thickness.
Tested According to EN ISO 20957, Class S
The PSP50i has been tested according to EN ISO 20957-1 and EN ISO 20957-2, Class S. It is suitable for commercial gyms, sports clubs, corporate fitness facilities, therapeutic settings and premium home gyms.
Technical Specifications
| Overall Dimensions and Frame | |
|---|---|
| Length | 213 cm |
| Width | 97 cm |
| Height | 162 cm |
| Weight | 165 kg |
| Frame Profile | 80 x 50 mm, wall thickness 3 mm |
| Footplate | 5.5 mm steel, non-slip surface, raised safety edge |
| Max. Load Capacity | 360 kg |
| Movement and Adjustments | |
|---|---|
| Design | Plate Loaded, Pendulum Squat |
| Counterweight | Freely adjustable |
| Footplate Angle | 30 - 45°, in 5° increments |
| Lower Range-of-Motion Stop | 5 adjustment positions |
| Pivot Axes | Ball-bearing mounted |
| Release Lever Handle | Ø 38 mm, 27.5 cm length |
| Padding | |
|---|---|
| Backrest Pad | 60 x 31 x 4.5 cm |
| Headrest Pad | 30 x 25 x 4.5 cm |
| Shoulder Pads | 20 x 11 x 7-10 cm |
| Weight Plate Holders | |
|---|---|
| Main Weight Plate Holders | 2 x 50 mm, length 48 cm |
| Counterweight Plate Holder | 1 x 50 mm, length 19 cm |
| Surface Finish | Hard chrome plated |
- Freely adjustable counterweight, providing assistance at the lowest point of the squat
- Footplate adjustable from 30 to 45° in 5° increments, 5.5 mm steel with raised safety edge
- Lower range-of-motion stop with 5 adjustment positions, ball-bearing pivot axes
- 80 x 50 mm steel frame profile with 3 mm wall thickness, 165 kg net weight
- Tested according to EN ISO 20957-1 and EN ISO 20957-2, Class S
2 of 2 reviews
Average rating of 5 out of 5 stars
5 out of 5 stars
Login
2 reviews
Von: Klaus · October 31, 2026 12:57 PM
Review with rating of 5 out of 5 stars
Ein super Trainingsgerät
Vielen Dank für so ein geiles Gerät !
Die Qualität ist sehr hochwertig und hat schon beim Zusammenbau großen Spaß gemacht.
Das Gerät ist sehr stabil auch bei hoher Belastungen und die Atlethen sind durchweg vom Training mit der Pendulum Squat absult begeistert so wie Ich auch.
Absolut empfelenswert!
Starke Grüße Klaus
Von: Seyfullah V. · December 23, 2024 3:01 PM
Review with rating of 5 out of 5 stars
Durchdacht und Solide
Ein großartiges Gerät mit beeindruckender Stabilität und zahlreichen Einstellungsmöglichkeiten – besonders die Funktion, die den Bewegungsradius begrenzt, ist ein echter Gamechanger!
Entdecke weitere Bein-Kraftstationen
Passendes Zubehör